ACI Concrete Flatwork Associate, Finisher, and Advanced Finisher Certification

The Flatwork Finisher Certification program was developed to certify experienced concrete finishers and upgrade the quality of concrete construction.

This Course is for the ACI Concrete Flatwork Associate, Finisher, and Advanced Finisher Certifications.

See full details below under the COURSE OVERVIEW SECTION

Definitions:

A Concrete Flatwork Associate (formerly Concrete Flatwork Technician) is a person who has demonstrated knowledge (via a written examination) on proper procedures to place, consolidate, finish, edge, joint, cure, and protect concrete flatwork.

A Concrete Flatwork Finisher (formerly Concrete Flatwork Tradesman) is a craftsman who has demonstrated the skills (via a hands-on performance exam) necessary to place, consolidate, finish, edge, joint, cure, and protect concrete flatwork.

An Advanced Concrete Flatwork Finisher (formerly Concrete Flatwork Finisher and Technician) is a craftsman who has demonstrated the knowledge skills and/or experience necessary to place, consolidate, finish, edge, joint, cure, and protect concrete flatwork.

2024 FLATWORK FINISHER CERTIFICATION - APRIL 1-2, 2024

 

REGISTER NOW FOR ACI FLATWORK FINISHER CERTIFICATION APRIL 1-2, 2024 

COURSE OVERVIEW


SCHEDULE

Day 1 - Class Instruction
8:00am - 4:30pm

Day 2 - Review & Written Examination
8:00am - 12:00pm

Course Fee/Exam Fee: Member Rate = $425.00

                                      Non-Member Rate = $600

The following topics will be covered:

  • Planning for slab-on-ground placement
  • Concrete materials, mixture proportioning, and control tests
  • Preparation before placing concrete
  • Floor flatness and levelness
  • Placing equipment
  • Finishing tools and equipment
  • Procedures for finishing slabs-on-ground
  • Jointing
  • Curing and protection of concrete
  • Finishing problems and possible solutions

Detailed Certification Requirements:

NOTE: THE MCA DOES NOT OFFER THE PERFORMANCE OPTION FOR THIS CERTIFICATION

Concrete Flatwork Associate: ACI will grant certification to those candidates who obtain a passing grade on the written examination. The two-hour written examination is closed-book and consists of approximately 50 multiple-choice questions. The passing grade for the written examination is 70%.

Certification is valid for a period of five years from the date of successfully completing all requirements.

Individuals with Concrete Flatwork Associate certification can upgrade to Advanced Finisher status upon submittal and approval of sufficient work experience or a combination of sufficient work experience and passing the ACI performance examination. Certification at the Advanced Finisher level is valid for the remainder of the original Associate certification period.

Recertification requires successful completion of a written examination OR 10 hours of documented continuing education from an approved source.

Concrete Flatwork Finisher: ACI will grant certification to those candidates who:

  • Possess 1,500 hours of actual on-the-job finishing* experience (approximately one year of regular full-time work) AND
  • Successfully pass the performance examination**

Certification is valid for a period of five years from the date of successfully completing all requirements.

Individuals with Concrete Flatwork Finisher certification can upgrade to Advanced Finisher status upon successful completion of the written examination. Certification at the Advanced Finisher level is valid for the remainder of the original Finisher certification period.

Recertification requires successful completion of either a performance examination OR a combination of 10 hours of documented continuing education from an approved source and 1500 additional hours of verified continuing work experience attained within the previous 5 years.


Advanced Concrete Flatwork Finisher: ACI will grant certification to those candidates who obtain a passing grade on the written examination PLUS either:

  • Possess 1,500 hours of actual on-the-job finishing* experience (approximately one year of regular full-time work) AND successfully complete the performance examination**, OR
  • Possess 4,500 hours of actual on-the-job finishing* experience (approximately three years of regular full-time work)

Certification is valid for a period of five years from the date of successfully completing all requirements.

Recertification requires successful completion of EITHER a written examination OR a combination of 10 hours documented continuing education from an approved source and 4500 hours of verified continuing work experience attained within the previous 5 years.

*Finishing experience includes concrete placement, consolidation, jointing, curing and protection, finishing, form setting, prep work, rubbing, patching, and saw cutting. Verification of the work experience by the candidate's employer(s) is required.

**During the performance examination, each examinee must place, consolidate, finish, edge, joint, begin curing, and provide initial protection for a concrete slab. The examiner will observe and evaluate the techniques used and record passing or failing grades on the various individual procedures.

NOTE: THE MCA DOES NOT OFFER A PERFORMANCE OPTION FOR THIS CERTIFICATION